An Almost Everlasting Evaporator Circulation Pump

02.03.2021
El-Nasr Company for Intermediate Chemicals (NCIC) is the largest fertilizer company in Egypt and a leading company in the North African market. Its Al-Fayoum fertilizer complex was started in 2011 and includes a phosphoric acid plant (150 tons per day P2O5). Sulzer was the selected vendor for the supply of the axial flow pumps, and many other pumps.
An Almost Everlasting Evaporator Circulation Pump

Evaporator circulation pump type CAHRM750K in the workshop prior to packing. (Image source: Sulzer Ltd.)

The challenge
The phosphoric acid is produced in a dihydrate (DH) process. The phosphate rock is attacked by phosphoric and sulfuric acid in a reactor. The 28% P2O5 acid produced is filtrated and then evaporated to a concentration of 54% P2O5.

The constraints of the evaporator circulator are:

  • 54% P2O5 acid with contaminants (HF, H2SiF6, H2SO4,≈ 3% solids)
  • maximum operating temperature of 95°C
  • manufacturer standard design (high flow, low head and limited NPSHa)
  • no speed variation
  • heavy duty and nominal bearing duration > 25’000 hours of operation

The solution
Sulzer selected the best pump size and propeller design for optimum benefits to the customer:

  • propeller specifically designed for the project, with high efficiency and lasting performance in a corrosive and erosive application
  • optimal selection of the operating point with regard to the BEP and inherent hydraulic constraints of axial flow pump
  • adapted mechanism for pulleys/belts assembly, guaranteeing perfect performance and long lifetime of the mechanical seals as well as trouble-free operation of the bearings

The construction material proposed by the engineering company was SS904L, which is a common material for such applications. Its advantageis good corrosion resistance in most low-temperature P2O5 applications.

Customer benefit
An axial flow pump with a state-of-the-art design, adequately selected to meet exact production needs and properly serviced, proved to be highly beneficial to our customer.

The pump was operated for eight years with no repairs needed. After that, the customer decided to replace the main wear parts: propeller, shaft, wear ring and mechanical seals.

Although many of the parts could have been re-used, the customer chose to replace them with genuine new parts. Reusing worn components would not have guaranteed a similar lifetime after restart.

Despite an apparently low solids content in the fluid, the total weight of solids passing through the pump during one hour of operation can be estimated to be about 180 tons. These solids are mainly gypsum and precipitates. The traces of erosion visible on the propeller did not reveal abnormal patterns. The hydraulic design tailored for the project turned out to be successful and highly reliable.

During these eight years, the total cost of ownership (TCO) was kept to a minimum, with no added costs for commissioning, no down-time costs, no removal and disposal costs. The only costs incurred were related to operation, i.e. energy and consumables, and routine maintenance.

"The Sulzer axial flow pump type CAHRM750K we use in the evaporator circulation loop has been running perfectly since start-up and we are very satisfied. We only had to replace some parts after eight years of operation, which is remarkable." Eng. Yasser Ahmed, Production Manager at NCIC

Project data
The pump is installed in an evaporation / concentration loop. It is located between the evaporator and the heat exchanger and takes care of the continuous circulation of the phosphoric acid through the heat exchanger and the evaporator.

ItemDescription
ApplicationEvaporator circulation pump
Liquid54% phosphoric acid @ 86°C
Pump typeCAHRM750K
Construction materialCasing/wearing/shaft in WN 1.4539 Propeller in WN 1.4584
Nominal speed520 (rpm)
LubricationGrease
InstallationPump/motor side mounting on common baseplate
MotorSIEMENS 250 kW – 3’300 V - 50 Hz
TransmissionPulleys/belts (10 belts)
Mechanical sealsJohn Crane P32+FA33

More articles on this topic

Sulzer Announces Opening of New Pioneering Service Center in Kuwait

10.12.2024 -

Sulzer has opened a new Service Center in Al Ahmadi, Kuwait, the first-of-its-kind in Kuwait to provide around-the-clock engineering services for all brands of pumps and rotating equipment. The newly opened Service Center supports over 1,500 Sulzer pumps already installed in local plants across Kuwait, while further servicing pumps from other brands. This is the first time an original equipment manufacturer (OEM) offers such comprehensive services in the region.

Read more

Seawater Lift Pumps Delivered in Record Time

04.12.2024 -

In the competitive world of supplying equipment to offshore platforms, Sulzer has succeeded in delivering another contract for seawater lift and water injection pumps. Streamlined processes have enabled the delivery time to be cut by almost 25% compared to industry expectations, saving precious project time and securing important contracts for two manufacturing sites.

Read more

Phosphorous Removal: Attaining the Highest Standards in Water Quality with Modern Filtration Systems

27.11.2024 -

Phosphorus is an essential nutrient for all living organisms, but its presence in excessive quantities in water bodies poses significant environmental challenges. Its runoff into lakes and rivers, as well as its discharge from municipal and industrial wastewater, can lead to serious environmental consequences. As countries tighten their legislation on water quality, wastewater treatment plants may need to install additional filtration equipment to comply with current as well as future standards.

Read more

New Booster Pump for Desalination Plants Based on Reverse Osmosis

04.11.2024 -

Sulzer’s ZF-RO combines experience and expert engineering for improved reliability and efficiency. Seawater reverse osmosis (SWRO) plants are playing an important role in supplying freshwater to communities that are struggling to find sufficient supplies. Sulzer is supporting these vital facilities with purpose-built pumps that are designed to optimize efficiency and reliability in this challenging application.

Read more