Sequential Overhaul of Filling Valves: KHS Makes Maintenance Faster, More Flexible and More Reliable
Further development of the sequential overhaul of filling valves means a single test kit can be used for different types of filling valve – a major benefit for production sites with several types of filler. (Image source: Frank Reinhold)
The sequential overhaul of filling valves is based on a simple but effective principle, which translates directly into measurable benefits for the customer, as Torben Brill, Service product manager at KHS GmbH explains. “Instead of shutting down the entire filling machine for a time-consuming full overhaul, at plannable intervals only as many filling valves are removed at once as there are in a replacement set – typically around 20 of them.” KHS fillers are equipped with 125 filling valves on average, depending on the container category and machine type. To overhaul all the valves in the traditional way, two employees normally need up to two weeks. But for sequential overhaul of the filling valves, a complete set of replacement valves can be changed in just two hours. After changing, customers can put the fillers straight back into operation again, although before that the valves are overhauled and tested for leaks using a mobile overhaul and test station. That reduces the error rate on startup to under 1%, and downtime from around two weeks to about 10 hours. “It significantly reduces downtime and ensures that production can start again more quickly and with quality that has been tested,” summarizes Torben Brill.
Advanced HMI and flexible test procedures
To make this process even more efficient and flexible for beverage bottlers, KHS has specifically improved the technology that is used. An advanced HMI now lets you choose between different test procedures, and a new adapter plate decouples the filling valve from the base plate. This means a single test kit can be used for different types of filling valve – a major benefit for sites with several types of filler. For customers, that means less equipment, shorter maintenance cycles, and valve quality that has been tested before installation. Torben Brill emphasizes that “KHS is continuously developing its products further, always taking specific customer requirements into account.” “We think it’s important to not only provide our customers with a technical upgrade, but also to make their day-to-day production work noticeably easier.”
Service made to measure
KHS takes the workshop directly to the customer; with a mobile overhaul and test station, all work can be carried out on site. Customers decide whether to carry out the process themselves or have KHS personnel do so. The all-inclusive, trouble-free package contains everything needed for one year – from measuring devices and an automatic testing device through spare and wear parts to sealing rings and easy-to-understand installation and operating instructions.
The service is available as part of a multi-year contract, with the test kit provided to the customer on loan free of charge. Prior to every assignment, KHS service specifically checks whether the customer's filling valves are suitable for the process, thereby ensuring optimum application.
Source: KHS GmbH
