Jet Edge Introduces New Waterjet Intensifier Pump

18.05.2011

Jet Edge introduces the new 150hp, 60,000 psi iP60-150 waterjet intensifier pump. The Jet Edge iP60-150 water jet pump is capable of producing up to 3 gallons per minute (11.4 l/min) of ultra-high pressure water for precision water jet cutting and UHP surface preparation applications.

Jet Edge Introduces New Waterjet Intensifier Pump

Jet Edge

It supports orifices up to .025” (.64 mm) and features dual intensifier systems.

The iP60-150 includes numerous design improvements, including an efficient kidney loop hydraulic cooling and filtration system, an anti-corrosive interior coated hydraulic reservoir, easy-to-remove lift-off covers, and touch-screen controls. The pump’s motor drive assembly has been mounted on an isolation system to reduce noise and vibration.

Like all Jet Edge waterjet pumps, the iP60-150 features Jet Edge’s reliable tie-rod design. This design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, making it less prone to cracking than threaded designs. Jet Edge water jet pumps feature hydraulic accumulators, which reduce wear on the hydraulic pump, and a rugged hydraulic center section which incorporates high-duty cycle-rated piston seal and wear rings. Jet Edge’s hydraulic systems have a 4,000-hour warranty. Jet Edge water jet pumps also feature attenuators which smooth pressure fluctuations and deliver a constant and steady stream of UHP water to the cutting tool, ensuring optimal cut quality.

More articles on this topic

Multi screw pump moves highly viscous heavy oil at low NPSHa

22.02.2024 -

At a tank farm in a Brazilian sea port, two centrifugal pumps were used for transferring heavy oil from storage tanks to road tankers or vessels until February 2020. This required the high viscosity of the medium to be reduced by means of diesel injection, costing the owner at least 2,000 US dollars each day. In addition, the centrifugal pumps regularly broke down due to cavitation damage. The owners decided to initially replace one of the two centrifugal pumps with a NOTOS multi screw pump from NETZSCH. Due to its very good suction capabilities, the selected four-screw 4NS is also suitable for highly viscous media with up to 200,000 cSt, achieving a flow rate of up to 3000 m³/h.

Read more

Desmi Introduces the Magnetically Driven Methanol Pump

20.02.2024 -

Safe and efficient DESMI mag-drive centrifugal pumps enable leakage-free methanol fuel systems for ships, reducing vessel carbon emissions and climate impact. With every year that passes, emission regulations tighten in the shipping industry. Shipowners who want to stay in business need to look for ways of reducing carbon emissions to comply with the targets defined in the IMO GHG Strategy and other regulations.

Read more

Free Rotating Retractor for Cleaning in Hygienic Processing Lines

02.02.2024 -

Preventing contamination is a crucial element in the design of hygienic processing lines. Yet manufacturers often face uncertainty when cleaning ducts, tanks and other confined spaces with hard-to-reach shadow areas. The new Alfa Laval Free Rotating Retractor, a high-efficiency retractable cleaning device, provides complete cleaning assurance, enhancing product safety while boosting uptime and productivity.

Read more