Neue Pumpenbaureihe HiLift von ABS für hohe Drücke

10.08.2000

ABS führt seine neue Baureihe HiLift für große Förderhöhen ein. Die neue Reihe bietet sicheres Abpumpen von Abwasser von Gebäuden, Baustellen und in der Industrie und ist ideal für Regenwasser geeignet.

Für den blockierungsfreien Betrieb wurden die neuen HiLift Pumpen mit dem patentierten ContraBlock System ausgerüstet.

The new HiLift range has been developed for those difficult applications where the head is high but the flow is relatively low. This can arise if the static lift is high or where the pipeline is very long, leading to high friction losses - or a combination of these circumstances.

Submersible Wastewater Applications

The new submersible HiLift pumps are for wastewater applications, including screened or unscreened sewage from buildings and sites in private, commercial, municipal areas and also for industry. They are especially suitable for stormwater where high heads are needed.

Further application possibilities for the robust HiLift range are dewatering in underground areas, wash down systems, water abstraction from lakes or rivers, quarries and lechate from land fill sides.

Reliable Operation with ABS ContraBlock

The pumps are available for high head pumping up to 75 m in 50 Hz or 90 m (280 ft) in 60 Hz. The range goes from 3.5 kW to 23 kW and is offered in both standard and explosion-proof version. The HiLift range comprises DN 65, DN 80 and DN 100 versions with solids passage of 45 (1¾") or 50 mm (2").

To provide blockage-free pumping even where the solids passage is small, the HiLift pumps are equipped with the ContraBlock hydraulics. The ContraBlock system acts as an anti-blockage device. The optimal design, with an open single or multiblade impeller revolving on a spiralled groove, ensures that solids or fibres are processed through the pump without blockage.

Patented by ABS in 1969, the ContraBlock technology has proved itself in numerous applications world-wide, giving reliable operation year after year.

Weitere Artikel zum Thema

Neuer Werkstoff in der Food-Pro-Reihe erleichtert Produktdesign für die Getränke- und Lebensmittelbranche

13.09.2022 -

Mit FoodPro E75F2 erweitert Trelleborg Sealing Solutions zur Drinktec sein Portfolio lebensmitteltauglicher Werkstoffe. Damit steht nun ein neues universell einsetzbares EPDM zur Verfügung, das sämtliche internationalen Vorgaben für Materialien mit Lebensmittelkontakt erfüllt und mit allen in der Branche gängigen Reinigungsverfahren kompatibel ist.

Mehr lesen