Wilden Pumps Ideal for Handling Resins, Solvents and Additives in Paint & Coatings Applications

20.02.2013

Wilden is pleased to announce that the High-Pressure models of its Advanced Series Metal Air-Operated Double-Diaphragm Pumps feature operational capabilities that make them ideal for the loading, unloading and transfer of resins, solvents and additives in Paint & Coatings manufacturing applications.

Specifically, Wilden High-Pressure air-operated double-diaphragm Pumps can generate up to 20.7 bar of pressure (300 psi), which is a core requirement for the reliable transfer of Paint & Coatings resins, solvents and additives that are viscous or solid-laden. Wilden offers three models of Advanced High-Pressure air-operated double-diaphragm Pumps:

  • H200: This 25mm (1”) duplex pump uses both liquid chambers to pump fluid. It is constructed of ductile iron and creates a 3:1 pressure ratio with a maximum inlet air pressure of 6.9 bar (100 psi) and maximum discharge pressure of 20.7 bar (300 psi) while delivering flow rates up to 94 L/min (25 gpm). It can handle solids up to 6.4mm (1/4”) at operating temperatures to 225ºF (107ºC).
  • H400S: This 38mm (1-1/2”) simplex pump uses only one liquid chamber to pump fluid while the second is used as a pressure-amplification chamber. It is constructed of aluminum or stainless steel and creates a 2:1 pressure ratio with a maximum air inlet pressure of 8.6 bar (250 psi) and maximum discharge pressure of 17.2 bar (250 psi) while delivering flow rates up to 242 L/min (64 gpm). It can handle solids up to 8mm (5/16”) at operating temperatures to 225ºF (107ºC).
  • H800: This 51mm (2”) duplex pump uses both liquid chambers to pump fluid. It is constructed of stainless steel or ductile iron and creates a 3:1 pressure ratio with a maximum air inlet pressure of 5.9 bar (85 psi) and maximum discharge pressure of 17.2 bar (250 psi) while delivering flow rates up to 359 L/min (95 gpm). It can handle solids up to 12.7mm (1/2”) at operating temperatures to 225ºF (107ºC).

All three models are available with Wil-Flex Diaphragms, which are ideal for resin, solvent and additive transfer. Wil-Flex diaphragms feature a flat-profile design that eliminates the need to invert the diaphragm when rebuilding a pump, which allows for easy, cost-effective installation and maintenance, along with increased flex life.

Picture: Wilden H800 (Image: Wilden Pump)

Source: Wilden

More articles on this topic

New 1500 Bar High-Pressure Hand Pump from SPX Flow

08.11.2018 -

Through its Power Team brand, SPX Flow ffers a comprehensive, leading portfolio of high force tools and equipment. The latest addition to this range is a new High-Pressure Manual Hand Pump, which is designed for controlled and reliable operation in the most demanding applications in the oil & gas, petrochemical and the power generation industries.

Read more

Total Pressure Measurement Equipment Expands to Include New Addition

23.10.2015 -

Many vacuum applications only operate in a certain pressure range. In order to operate vacuum systems with high precision, the total pressure must be measured reliably. For this purpose, Pfeiffer Vacuum offers a range of different measurement equipment series with a digital or analog signal output, which is now being expanded with the addition of the CenterLine series.

Read more
Directly to the product selection in

PumpSelector

LATEST NEWS

  • Advertisement
  • Events

    « September 2020 » loading...
    M T W T F S S
    31
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    1
    2
    3
    4
  • JOB MARKET