SAER ELETTROPOMPE Opened a New Factory

10.06.2002

The Company SAER ELETTROPOMPE has opened a new factory for the mass production of the submersible motors, 6”, 8”, 10” and 12” 50 Hz. and 60 Hz operations.

The company uses the latest manufacturing technology for the production of all the products. Within the company is a quality control department which controls all aspects of the production. All the products are to the latest electrical standard CEE and within the next twelve months will have the ISO 9000 Registration.

Production factory in Guastalla(Via Parma): Production of submersible motors 6”-8”-10”-12”

Saer Elettropompe is now able to offer one of the more interesting products on the market with the advanced technology and many advantages i.e.:

  • Water rewindable motors
  • Thrust plate type “MITCHEL” particulary suitable to support axial loads according to NEMA Standards
  • Standard mechanical seals with high abrasion resistance:

    A: SILICON CARBIDE-ALUMINA OXIDE for 6” motors

    B: TUNGSTENE CARBIDE-TUNGSTENE CARBIDE (WIDIA-WIDIA) for 8”-10”-12” motors.

  • Tension variation +5%-10%
  • Bidirectional rotation
  • Squirrel cage rotor in copper to have a better resistance against the corrosion
  • Standard version in stainless steel and cast iron
  • Special execution on request:

    A: Motor in bronze on 6”, 8”, 10” and 12”

    B: motor fully in stainless steel for 6”, 8”, 10” and 12” (AISI 316)

    C: motor with special winding for hot water, temperature higher then 60°C

  • motor power from 3,5 up to 375 KW
  • full guarantee 1 year
  • rotor shaft in stainless steel AISI 431
  • competitive price

Other Production Factories are:

Production factory in Guastalla (Via Circonvallazione ):

Commercial and administration offices,

Technical department, Quality control and witness testing-room, Mechanical workings

Production of peripheral pumps, self prime pumps, single-and twin impeller pumps, DIN 24255 standard enbloc pumps. Component manufacturing for submersible pumps, Vertical multistage pumps, Production of submersible pumps, Finishing and painting departments

Main stock warehouse, central dispatch department

Production factory in Tolmezzo:

Manufacture of electrical wound stators

The total daily production of pumps is approximately 2000 units with a yearly production of 30.000 submersible motors.

For more information, please visit the web site: www.saersubmotors.com

The company was founded in 1956 by the Favella Family. Since its conception the name SAER ELETTROPOMPE SRL has been synonymous with development in water technology. The current President of SAER is Franco Favella and the Vice President is Mauro Favella.

The company has three manufacturing plants : the head office and production dept. are based in Guastalla with a further manufacturing plant in Tolmezzo near the Austrian Border.

In November 1999 the company moved into the new premises with a coverage of 60.000 m², therefore the total coverage is now 100.000 m².

The total workforce is 200 people which comprises of production, administration, commercial offices, technical offices and production staff. The company also has a network of qualified technical and skilled personnel outside the company. The research into pumping technology as well the latest innovations has allowed SAER ELETTROPOMPE to develop reliable and sophisticated products now worldwide exported.

The company has always placed the strongest emphasis on all aspects that relates to the concept of quality. In this respect, it has issued in its head offices a research centre of 2000 sqm with latest computerized apparatus where it is able to test automatically up to 350 kW all its productions. SAER has always paid attention to design high efficient pumps in compliance with International Standards covering anti pollution and specially energy saving.

The company distributes to 130 countries over the world and has a distribution network in Italy of 15 companies.

More articles on this topic

Filling Composites in the Dental Industry

29.09.2020 -

In the dental industry, consumables such as composites are filled into disposable syringes with Luer Lock attachment or into smaller Unit Dose packages. These flowable filling materials made of plastic and glass are usually highly abrasive, highly viscous, and stringy. This places high demands on dosing and filling systems. The materials are used in the dental industry, for example, for sealing, restorations, or core build-up.

Read more

VSX Supports arche noVa’s Emergency Aid Operation in Lebanon

23.09.2020 -

Over a month ago, the devastating explosion in the port of Beirut injured and even killed many people and destroyed countless buildings. For the already crisis-ridden country, this is yet another setback that could hardly be overcome without humanitarian aid from abroad. To support one of these relief efforts, VSX – VOGEL SOFTWARE has made an immediate donation to the Dresden-based relief organization, arche noVa – Initiative for People in Need.

Read more
Directly to the product selection in

PumpSelector

LATEST NEWS

  • Events

    « September 2020 » loading...
    M T W T F S S
    31
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    1
    2
    3
    4
  • JOB MARKET