Lutz-Jesco: Solenoid Diaphragm Dosing Pumps for a Wide Range of Applications

13.09.2012

Magdos LK and Magdos LP pumps are each available in seven capacity ranges.

Lutz-Jesco: Solenoid Diaphragm Dosing Pumps for a Wide Range of Applications

Magdos LK and Magdos LP (Image: Lutz-Jesco)

The power ranges cover from 0.5 to 15 l/h with back pressures up to

16 bar. Double-ball valves ensure accurate dosing. The stroke frequency of MAGDOS LK pumps can be adjusted manually or by means of external control contacts to adapt the dosing capacity, while the stroke frequency of Magdos LP pumps can also be adjusted via a 0/4…20 mA signal. You can thus dose with a flick of the wrist.

Several different materials and connections are available for suction and discharge side, depending on the specific applications. Both pumps can be used in the majority of process applications by the use of appropriate and recommended materials.

A matching accessory set with hoses, injection nozzles and suction lines from out comprehensive accessory range means that nothing stands in the way of a quick installation, and you get the best results.

Thanks to the sturdy, low-maintenance solenoid drive, the media being supplied (acids, alkalis, coagulants and flocculants, for example) are reliably and accurately dosed. Magdos LK and LP pumps are not only impressing customers with their stylish design but their use is simplified by their graphical display with multilingual menu as well as their operation using the integrated keyboard.

The Magdos LP is also available with an optional Ethernet interface. This network connection enables you to control the stroke frequency and the number of strokes. In addition, all error messages can be transmitted in the opposite direction.

The space-saving design and footprint of these dosing pumps means that they can be integrated into all dosing systems and can be wall-mounted in three different positions - standing, left-orientated and right-orientated - without the need for any additional equipment.

More articles on this topic

Dosing of Sugar Icing on Bakery Products

19.09.2019 -

Sugar icing is the “icing on the cake” of many baked goods. The dosing is usually done by hand in complex production steps. Most today s gingerbread decorations, for example, are still made manually with the piping bag. But the degree of automation is also being increased in the baked goods industry. There are several reasons for this: Stricter hygienic regulations or high personnel costs, for example. With the endless piston technology on which the dispensers and dosing pumps from ViscoTec are based, decoration tasks or filling in the confectionery industry can be carried out semi-automatically and fully automated.

Read more

Filling and Dosing Without Sedimentation

13.09.2019 -

A major challenge in dosing technology continues to be the gentle dosing of solids-laden liquids without damaging the solids. In addition, there is a risk that the solids will settle during prolonged downtimes. The material sediments. If this happens, the dosing unit becomes clogged and must be completely disassembled and cleaned. This interrupts the entire dosing process.

Read more

New Wear-Resistant Stator Material by ViscoTec

15.11.2016 -

The requirements for dosing systems are particularly high and nowhere more so than with regard to hygiene. The use of abrasive media often leads to increased mechanical wear on components. Some fluids even seem inadequate to be integrated into fully automatic production lines and to be filled with process reliability.

Read more
Directly to the product selection in

PumpSelector

LATEST NEWS

  • Advertisement
  • Events

    « September 2020 » loading...
    M T W T F S S
    31
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    1
    2
    3
    4
  • JOB MARKET