Almatec BIOCOR Series Pumps Provide Sterile, Superior Performance in Pharmaceutical Applications

Available in three sizes—B20, B32 and B40—with maximum capacities of 15, 34 and 70 gpm at a maximum discharge pressure of 100 psi, BIOCOR Series pumps are EHEDG certified and conform to ATEX regulations that are laid out in the 94/9/EG directive. Helping the BIOCOR pumps meet these strict sanitary requirements is a design that features no horizontal areas where product can get trapped. Additionally, the sizes B20 and B32 are equipped with four ball-lifting magnets that are attached to the pump housing at the location of the four ball valves. This method of construction and operation ensures that the pump is drained completely without having to be dismounted, which enables clean-in-place (CIP) and sanitize-in-place (SIP) capability while eliminating the need for mechanical ball-lifters that would be located in the wetted area.

BIOCOR pumps also feature step-less flow control via air pressure and volume without complex mechanical control units, which prevents overpressure while ensuring maximized output and efficiency. The material for the wetted housing parts is electro-polished 316L (Basel Standard II, ferrite content < 1%) stainless steel with a center block of PE conductive, while the diaphragms, ball valves and O-rings are made of PTFE or EPDM.

Finally, BIOCOR Series pumps are also equipped with the patented PERSWING P air control system. This metal-free, pneumatically pilot-operated control system ensures accurate reversal of the main piston and is characterized by low noise level. It does not require maintenance, operates without any lubrication and is made up of no more than four different parts.