Hidrostal Solve Pump Blockage Problem

13.12.2004

The Netherley Sewage Pumping Station (SPS) is a traditional wet/ dry well located in the United Utilities area on the outskirts of Liverpool. It is a terminal SPS and pumps directly to the inlet at Woolton WWTW approx 1.5 miles away.

The pump houses four pumps which were originally installed in 1968. In 1998 United Utilities decided to replace the pumps as they were beginning to wear out and the company that supplied them was no longer trading. United Utilities purchased four 200mm discharge dry well submersible pumps with 102mm throughlet (impeller free passage). However, only one was ever fitted and put into service as the pump suffered from severe ragging problems despite the supplier trying various impellers over a 4 year period. Barrie Holmes, United Utilities, Field Services Engineer remembers: ‘The pump blocked continuously. The longest it went without blocking was 18 hours and during storm conditions the pump would have to be lifted two or three times a day’.

Subsequently, early in 2004 Hidrostal were contacted and asked to supply a replacement pump. The solution was proposed by Ivan Finch, Hidrostal’s Sales Engineer, who explains: ‘Following extensive analysis of the situation it was clear that the blockage problem was caused by the pump having an enclosed impeller To handle raw sewage it is essential that pumps have a large free passage and an open impeller geometry. I proposed the Hidrostal HO8K-H Screw Centrifugal pump, with a 145mm impeller free passage and running with a VS drive between 1460 and 950 RPM giving a flow of between 200 and 100 lit/sec. In mid June 2004, we removed the problem pump and installed the Hidrostal HO8 with some slight modifications to the pipework. Since installation, to the delight of the site operators and engineers, the pump has not had to be touched and there has been no problem with blockages’

More articles on this topic

Richmond Utility Uses Real-Time Analytics for Plan to Reduce Combined Sewer Overflows

03.05.2024 -

The city of Richmond, Virginia needed a plan to reduce combined sewer overflows (CSOs) into the James River, but how could its utility operators know which new infrastructure projects would have the biggest impact? The solution was a real-time visualization and decision support system from Xylem that identified critical infrastructure projects, helping the city develop a plan that could reduce CS0s by 180 million gallons and save costs.

Read more

Multi-Purpose Actuator Enables Ball Valve to Open and Close Automatically

02.05.2024 -

A major southern grow operation needed a valve to open and close automatically on a series of remote fertigation pipelines. The lines were in a location where compressed air and electricity were both unavailable and impractical. It was essential to have the valve close whenever the water supply dropped below operational pressure, to prevent the percentage of nutrients from exceeding safe levels and harming the crop.

Read more

Clean Alternative Fuel Liquid Ammonia Requires Fail-Safe and Hermetically Tight Pumps in the Shipping Industry

02.05.2024 -

Ammonia is currently at focus as clean alternative to heavy fuel oil that has predominantly been used. The technology employed in order to use liquid ammonia as a fuel must be hermetically tight and guarantee maximum operational safety as the gas is toxic and harmful to the environment. LEWA’s high-pressure diaphragm pumps meet these requirements. Their standard safety mechanisms make them suitable for hazardous, toxic and environmentally harmful fluids such as NH3, even under extreme operating conditions.

Read more