impeller.net The Online Pump Magazine

20.03.2015

Homa Presents the Bully C140 WA

Stainless steel shaft with ceramic-coated sealing surface permits continuous Operation (Image: Homa Pumpenfabrik)

The Bully C140 WA can be used in stationary operation for draining domestic sewage from sumps and cellars, from washing machines, washbasins or showers, for example. Furthermore, the connecting cable length of 10 m also permits mobile outdoor use, for example in flooding or to keep pits dry.

"This new model is the first pump by Homa fitted with a lever-float switch", explains Jörg Schiller, sales manager for building services at Homa. "Our expertise from more than 60 years of experience in the development of sewage and drainage water pumps has been harnessed particularly in the construction of this component, but naturally in all other components as well."

Stainless steel shaft with ceramic-coated sealing Surface

In addition to the distinguishing features generally accepted on the market, such as built-in flat-surface drainage, automatic flushing and float switch, the Bully C140 WA is in addition fitted with a stainless steel shaft with a ceramic-coated sealing surface. The ceramic coating, in combination with three lip seals and an oil chamber, guarantees the greatest operational safety even in continuous operation. In addition to the air bleed valve, the Bully also has a venting screw in the pump chamber that saves the user setting a vent hole by means of a drill when the need arises. "Only an appropriate screwdriver is necessary to unscrew the Venting screw conveniently out of the pump chamber. The pump can then be operated even in a pit or collecting tank that occasionally runs dry“, says Schiller. This simultaneously minimizes any damage to the pump and prevents unnecessary service calls, further enhancing operational safety.

High pump Output

HOMA s new pump delivers 320 W output with a 7 m discharge head and a flow rate of 6.5 m³/h. The range of deliveries with the pump includes a connecting bend (1 ¼“ F/F) with seals, a check valve for mobile use and an fixing clamp for the float switch, to allow a continuous operation. "The Bully C140 WA is the first pump in a new series, and further models are already planned“, explains Schiller. "Furthermore, the Bully will be available this year already in combination with the wastewater disposal unit Saniquick C.“

Picture: Stainless steel shaft with ceramic-coated sealing surface permits continuous Operation (Image: Homa Pumpenfabrik)

Source: HOMA

HOMA in the Virtual Exhibition


More about HOMA


News about the topic DRAINAGE



News about the topic SEWAGE