impeller.net The Online Pump Magazine

14.03.2012

Neptune 500-D Series Hydraulic Diaphragm Metering Pumps

Neptune Chemical Pump Co.

Neptune Chemical Pump Co. designed its 500-D Series Hydraulic Diaphragm Metering Pumps for use in a wide array of industries and applications, from mining and agriculture to industrial and municipal water treatment.

Neptune 500-D Series (duplex) pumps are designed with features that set the standard in the industry. Its EZE-CLEAN valve cartridges can be removed from the pump heads without having to disturb the pumps piping. Neptunes Variable Oil By-pass stroke adjustment provides better valve performance than variable-linkage designs. Other standard features of Neptune pumps include double ball-check valves, internal relief valve, and a hydraulically balanced Teflon diaphragm for extended life. Optional features available are automatic flow rate adjustment using an electronic stroke controller and variable frequency drives.

The 500-D pump head materials of construction are 316 stainless steel, C-20, PVC, and Kynar. Material options for the ball check valves are 316 stainless body and seat with 316 balls, PVC body and seat with ceramic balls, C-20 body and seat with C20 balls, and Kynar body and seat with ceramic balls. Flow rates at 100 psi (60 Hz) range from 1 to 60 gph (4 to 228 lph) depending on gear ratios of 37, 72, 117 and 144 strokes per minute. Maximum operating pressure is 3,000 psi (207 bar) and maximum temperature of 200F (93C) for 316 stainless steel and C-20; maximum pressure and temperature of PVC is 400 psi and 125F; and the maximum pressure and temperature of Kynar is 150 psi and 200F.

Picture: Neptune Chemical Pump Co.

Source: Neptune Chemical Pump

More about NEPTUNE CHEMICAL PUMP


News about the topic METERING PUMP


News about the topic WATER TREATMENT